Components: Building Blocks
Used to enhance and modify workstation structures.
Status Light
Full Tiers
Use when you want to add an additional horizontal tier between the vertical risers. Match the widths to the size of the Basic Structure. Hand knobs are optional. Comes with (2) two part tee fittings (90054S) for quick changes. The full tier will support 100 lbs. distributed and higher loads with modifications.
| Width | Model No. | ESD Version |
|---|---|---|
| 4' Small | 90012 | 95012 |
| 5' Medium | 90013 | 95013 |
| 6' Large | 90014 | 95014 |
Outlet Strip
Overhead Support Module
Use to hang tools and /or a lighting fixture. Match the widths to the size of the Basic Structure. For additional support, use a pair of small gusset braces (90047). Weight capacity without gussets is 30 lbs. and 50 lb. with gussets.
| Width | Model No. | ESD Version |
|---|---|---|
| 4' Small | 90017 | 95017 |
| 5' Medium | 90018 | 95018 |
| 6' Large | 90019 | 95019 |
Outlet Strip
Gusset Brace Assemblies
Use with heavy parts or fixturing when you need to increase the strength and capacity of the workstation. Also recommended for use with overhead assemblies (90017).
| Tube-to-Tube | ||
|---|---|---|
| Length | Model No. | ESD Version |
| 7' | 90047 | 95047 |
| 13' | 90048 | 95048 |
| Surface-to-Tube (not shown) | ||
| 13' | 90049 | 95049 |
Flo Thru Bar Assembly
Half-Tier Module
Achieves wrap around parts presentation to restrict the angular sweep of the extended arm to less than 45°. Either length can be used on any of the Basic Structures. Comes with (1) two part tee fitting (90054S). Weight capacity for the small half tier is 40 lbs. and the large half tier is 25 lbs. max. High capacity can be achieved with a tube/tube gusset (90047).
| Length | Model No. | ESD Version |
|---|---|---|
| 15' | 90015 | 95015 |
| 24' | 90016 | 95016 |